Coca Cola glass lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I can't imagine a lot of folks finding a need for this, but here it is. A couple of years ago, McDonald's was selling…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I can't imagine a lot of folks finding a need for this, but here it is. A couple of years ago, McDonald's was selling these Coca-Cola glasses in 4 colors: clear, green, blue & purple. I am not a big collector or anything, but I like the classic Coca-Cola glass design & bought them just for display. Problem is- these things are DUST MAGNETS.
So I designed a lid that somehow fit absolutely SNUGLY on the first try. It actually takes a little pressure to SNAP it into place, and effort to snap it back off, with an audible snap each time. Yay for digital calipers and some beginner's dumb luck!
I suppose that if you really wanted to, you could add a hole for a straw, but that's on you. I got what I needed from the design- dust cover.
A couple of measurements:
Glass lip ID: 79.2mm
Glass lip OD: 84.7mm
Lip height: 2.1mm
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/4qcmityoAth
Print Settings
Printer:
Monporice Maker Select i3 v2.1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2mm
Infill:
20% rectilinear
Notes:
Printing with Hatchbox standard PLA @ 200 C, and bed @ 60 C.
Category: Household