Andrea Doria Hull V.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V.2 will soon be available, as soon as I have made a testprint...
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 1294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
(V.2 will soon be available, as soon as I have made a testprint...)
This is the first build I publish. I dont think I will change anything but you never know.
The superstructure is intended to be built with wood... only the hull will be printed.
A superstructure that fits is available on Thingiverse by another author. Andrea Doria superstructure by Theidd - Thingiverse
Sutable details: Andrea Doria Details by LoneWolf-GER - Thingiverse
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Rafts:
Yes
Supports:
No
Resolution:
0,2
Infill:
10%
Filament: Colorfabb nGen
Notes:
I recommend using brim because the walls are quite thin and high.
After printing the first piece I decided to cut the hull in smaller pieces.
I also added an enginemount, rudder and fastenings for a servo.
Post-Printing
How I Designed This
I designed this using sculpt in Fusion 360.
I took an image from above and one from the side and aligned them.
Then I made a "box" in sculpt and molded the chape to fit the images.
Category: R/C Vehicles