Hero Me Gen 5 - Pheatus Dragon base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hero Me Gen 5 base for the Dragon hotend. Should work with the newer Gen 6 parts as well due too.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is designed to allow a slide-through style PTFE fitting to screw right into the top, and then slide the PTFE tube down through and directly down onto the top of the dragon. It should be aligned so that when feeding filament into the hotend it feeds smoothly.
I printed this in PETg on a 0.4mm nozzle and line width. I recommend using whatever percentage cooling which gets you the best quality while still getting good layer bonding. On my low speed fans that is 100%, on my high speed fans that is 35%.
Print with supports touching build plate, I always use tree supports as I find they are usually better than regular supports. You will need to take a file to the underside of the part that the dragon interfaces with in order to get it as smooth as possible.
I have been using this model on two of my printers for over a year and just installed it on a friends as well. I hope others can find it useful.