Minifig canister
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage canister for Lego minifigures with a compartment for some accessories.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 84
- Wydruki
- 1
- Wyświetlenia
- 430
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
This is a small storage container for a Lego minifigure with a small storage compartment for accessories in the base.
The platform in the middle has pegs to snap the seated figure into.
The sides are embossed with “Figure” and “Parts” but I provided unlabeled variants if you prefer no markings on the side. The lid doesn't have a label on the flat side like the picture shows, it is trivial to add though.
I provided the CAD model files for Fusion 360 and Solidworks if you want to customize the lettering or compartment sizes.
Print Settings
Printer: Ender 3 Pro w/ direct drive
Rafts: No
Supports: Yes
Resolution: 0.15-0.2mm
Infill: 15% or higher
Shells: 2+
Note: The two caps can print without support if printed with the flat side on the print surface. Only the middle section will need support. I printed with 15% cubic infill and it was pretty solid.