1 / 1
Plant Support Wheel for tomatoes and other wiggly plants — zdjęcie 1

Plant Support Wheel for tomatoes and other wiggly plants

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,22 € – 0,27 € netto (bez VAT)

Dla pliku: tomatstod_0.2mm_PLA_MK3_15m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,25 € netto (środek widełek).

Masa podana przez autora
3 g
Czas druku podany przez autora
15 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Plant support wheel to put on a wooden plant stick. Slim version which uses only one meter of filament.

Ocena
4,846 / 5
Polubienia
500
Pobrania
981
Wydruki
17
Wyświetlenia
7666
Oceny
13

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Simple but effective support for plants that are not able to support themselves.

Fits standard ⦰5 mm wooden plant sticks, but the size is configurable in the source code. You can use more than one support wheel on the same stick if needed.

Update 2022-06-07: Added a new version (v2) of the source file which allows for easier modifications via the OpenSCAD customizer. You can now use sliders to change dimensions and the number of arms. I have also uploaded STL-files for both thin and thick variants.

Tagi