1 / 2
ZS56/1.5" headset press adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For pressing zero stack cups into a ZS56 frame
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 712
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
Headset press adapters are the same outer dimensions as a 52mm headset bearing to mate with a ZS56 cup. I have a bike with the new 1.5" straight head tube standard (ZS56/ZS56) and printed two.
Built around a Pedro's shop headset press with an 18mm shaft but will work with EVT headset press and Park Tool home mechanic press. May not be wide enough for the Park HHP-2 shop press.
Printed with PETG and no supports. Does not mar cups.