1 / 7
Storage bucket and a toy for kids (for SUPER ZINGS) — zdjęcie 1
1 / 7

Storage bucket and a toy for kids (for SUPER ZINGS)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It is something nice I've made for my nephew as a Christmass gift. It is both practical, playful and great looking.

Ocena
5 / 5
Polubienia
26
Pobrania
464
Wydruki
3
Wyświetlenia
2376
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

It is something nice I've made for my nephew as a Christmass gift.
It is both practical, playful and great looking. The kid is collecting SUPER ZINGS figurines and they are scattered around the apartment. This storage bucket which is also a toy to play with, helps him to store those small figurines in one place.

There is a place inside for about 100 super zings or other small figurines (e.g. stikeez).

The other practical use of bucket is to put a flowerpot inside it and keep it as a great decoration in children's room.

Print instructions

  1. Print in colors as seen on picture.

  2. Print settings for most parts:

  • layer: 0.2
  • infill: 20-30%
  • no supports
  • filament: PLA or PETG

    For teeth

  • layer: 0.1
  • supports needed
  1. Assembly:
  • glue feet to main bucket
  • glue eyebrows / eyes / yellow plate to bucket
  • fix arms with screw and nut (M3) and make it tight
  • glue hand to small arm
  • glue coat to main bucket

Use super glue but sand plastic a bit before.
For eyebrows and eyes you can also use double sided tape.

  1. BE PATIENT - there are many parts and it takes some time to print them. But if your kids are collecting zings ... they will love it.