5-Minute Epoxy Storage Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage caddy for 5-minute epoxy from the hardware store.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 266
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
This is a caddy for storing 5-minute epoxy that comes in two bottles. It fit two 4 ounce (118ml) bottles of Loctite brand epoxy from the home center. Other brands had similarly sized bottles as long as they are less than 43mm in diameter.
There are three versions
- 4 bottle holder with handle
- 4 bottle holder without handle
- 2 bottle holder with handle
The 4 bottle holder lets you keep two new bottles while keeping old bottles to use them up.
Print Settings
Printer: Ender 3 Pro w/ direct drive
Material: PLA or PETG
Rafts: No
Supports: No
Resolution: 0.15-0.2mm
Infill: 15% or higher
Shells: 2+
Notes: I didn't need supports for the handle when printed upright.