Steam Deck Dock/Display Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take at a dock/display stand for the Steam Deck
- Ocena
- 4,857 / 5
- Polubienia
- 283
- Pobrania
- 2521
- Wydruki
- 39
- Wyświetlenia
- 11 105
- Oceny
- 28
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My take at a dock/display stand for the Steam Deck. The back logo is intended for adhesive rubber cut in shaped of the logo for added grip but that has proved unnecessary with testing. I have included the logo to be printed as an insert in any color you like.
Version 3:
New shorty model available. I sunk the base as far as I could and added a very short backrest. I have found that groove provide plenty of holding power and the backrest isn't as necessary as I originally thought. I have not tested this model yet. But I am fairly confident that it will work.
I have remade the entire model for better printing. Supports should not be needed with good cooling. I have also included a nicer cutout for my hub which is Cable Matters model 201048-BLK. Mount on the back with double sided tape. A right angle is required given the sharp bend.