1 / 8
New  rims, tires and headlights for LEGO Porsche RSR — zdjęcie 1
1 / 8

New rims, tires and headlights for LEGO Porsche RSR

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Because the original rims of LEGO ® Porsche 911 RSR set do not look like Porsche (see Pics), here is my version of RSR…

Ocena
2 / 5
Polubienia
48
Pobrania
301
Wydruki
1
Wyświetlenia
3611
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution

Because the original rims of LEGO ® Porsche 911 RSR set do not look like Porsche (Pic.3), here is my version of RSR rims and tires.

For the rims I used black filament. The tires I printed out of flexfilament from Extruder.

The flexfilament has a shore hardness of 40, softer plastic would be better here.

I reworked the rims again because the tires were not easy to mount on the rims.

Now the Porsche finally looks like a Porsche ;)

Attention the original tires do not fit on the rims!

if you do not want to print the tires separately from flex filament I have uploaded the wheel also assembled. It can be printed as a whole.

They must have had a bad day at lego when developing the headlights. The SET's original headlights look like the eyes of an inflated frog (see last pic.). Here now my version of the Porsche headlights. OK I admit are also not perfect but decide for yourself whether you want to change the headlights. I used transparent filament for the print. With a resin printer it would probably look even better...

Print Settings

Printer:

Artillery Sidewinder X1

Rafts: 

Doesn't Matter

Supports:

Yes

Infill: 

15%

Filament: 3DJake / Extrudr ECO PLA / TPU Flex medium Black / Anthrazit

 

 

Category: Vehicles

Tagi