Floater for mist maker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of @ulitiy's nice floater for the ultrasonic mist maker: https://www.thingiverse.com/thing:3900020…
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 358
- Wydruki
- 0
- Wyświetlenia
- 2249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of @ulitiy's nice floater for the ultrasonic mist maker:
https://www.thingiverse.com/thing:3900020
This thing floats on packaging foam, rather than on infill air pockets that are rather difficult to print watertight.
OpenSCAD file is included.
Print instructions
I printed this with PETG on the textured PEI sheet, and used “Archimedean Chords” as the bottom infill pattern.
I used soft packaging foam, cut it roughly to shape, and squeezed it into the floater. No glue necessary. I am also using this splash guard:
https://www.prusaprinters.org/prints/20578
The splash guard fits both the original design as well as this remix.