1 / 9
Brackets, table
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Table made of scrap wood & 3D printed brackets to hold them together
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I made this table out of scarp wood, mostly very old shipping crate planks and scrap wooden railings. The wood is not square, i put this together only cutting the pieces to length. I used different sizes of drywall screws to fasten the pieces together.
Corner brackets were printed in PLA Ender 3v2
The other brackets printed in ABS on Ender 3v2