1 / 2
Ball mill container tightening handles / Griffe zum Festziehen von Kugelmühlengläsern — zdjęcie 1
1 / 2

Ball mill container tightening handles / Griffe zum Festziehen von Kugelmühlengläsern

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Für MM400 Kugelmühlbecher der Firma Retsch

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
0
Wyświetlenia
268
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

We have used the Retsch MM400 ball mill successfully in various projects. It turned out that the supplied handles are not ideal. Especially during the use in the glovebox they often slip. If the container is poorly closed, leakage often occurs, especially when using liquid reactants. Therefore, I have designed new handles with a very simple design.

Print:
Printer: Anycubic Mega X
Resolution: 0.3 mm
Support: yes
Material: PLA
Infill: 25%
____________________________________________________________________________________________________________

Wir haben die Kugelmühle MM400 der Firma Retsch erforglreich in verschiedenen Projekten eingesetzt. Es stellte sich heraus, dass die mitgelieferten Griffe nicht ideal sind. Besonders während der Nutzung in der Glovebox rutschen sie oft. Ist der behälter schlecht verschlossen kommt es häufig zu Leckagen, besonders bei der Nutzung flüssiger Reaktanden. Daher habe ich neue Griffe mit einem sehr simplen design entwurfen.

Druck:
Drucker: Anycubic Mega X
Auflösung: 0,3 mm
Supports: ja
Material: PLA
Infill: 25%

Tagi