Lava Lamp Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jim, a friend at work, came in with a broken lid to his Lava Lamp and asked if I could make a replacement. I love to…
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 49
- Wydruki
- 1
- Wyświetlenia
- 425
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Jim, a friend at work, came in with a broken lid to his Lava Lamp and asked if I could make a replacement. I love to use my Printrbot to make replacement parts for things, so I gave it a try. This worked for him and maybe someone else will need one someday.
Print Settings
Printer Brand:
Printrbot
Printer:
Play
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15%
Notes:
I used red Maker Geeks PET+ since this might get a bit warm and PET+ is much more heat resistant than PLA. Printed with 4 top and bottom layers, 2 shells, 245C temp.
Post-Printing
The Maker Geeks red PET+ looks like a translucent watermelon pink when printed. Not the look Jim was going for. He sanded, primed and painted the top with some rattle-can semi flat black paint. He reports no issues with heat affecting the lid so far.
Category: Replacement Parts