Inkpen Tracker Bands
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm always losing my ink pens at the office. I lay one down somewhere, and then I have nothing to write with the next…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I'm always losing my ink pens at the office. I lay one down somewhere, and then I have nothing to write with the next time I need one. Where do they go? I needed a tracking device. I thought I'd use some NinjaFlex filament to band my pens so I could recognize them if I saw them again. Much as scientific researchers do to track animals in the wild.
I measured various writing utensils I had on my desk and used 123D Design to make flexible bands to fit them. If you need a size not listed, they can be scaled to fit in your slicer software.
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Plus
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
100%
Notes:
I slowed the bot way down to 10mm/sec, no retraction. I printed at 230C on a Kapton bed wiped with a glue stick heated to 70C.
How I Designed This
Designed with 123D Design
I started with a cylinder 4mm tall and 2mm larger than the ID of the band I wanted. Then I created another cylinder 10mm tall and the exact size of the ID of the band I wanted. I then snapped the smaller one onto the larger one. Using the move tool I moved the smaller one down through the larger one. I then used the Combine/Subtract tool to cut the smaller one out of the larger one, creating a band.
Category: Office