M6x20 button head Phillips bolt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I used this to build the Digital Sundial http://www.thingiverse.com/thing:1068443 Customized version of…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 407
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I used this to build the Digital Sundial http://www.thingiverse.com/thing:1068443
Customized version of http://www.thingiverse.com/thing:193647
Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Plus
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
100%
Notes:
Use a brim because the point of contact with the bed is minimal. I used 8 lines.
Instructions
Using the following options:
head_type = button
nut_resolution = 0.5
thread_step = 2
step_shape_degrees = 45
nut_thread_outer_diameter = 9
slot_depth = 2
type = bolt
drive_type = phillips
head_diameter = 10
outer_diameter = 14
nut_type = normal
slot_width = 1
thickness = 2
nut_diameter = 12
resolution = 0.5
drive_diameter = 5
nut_step_shape_degrees = 45
texture = exclude
inner_diameter = 8
facets = 6
non_thread_diameter = 0
nut_thread_step = 2
countersink = 2
wing_ratio = 1
nut_height = 6
non_thread_length = 0
head_height = 5
thread_outer_diameter = 6
thread_length = 20
Category: Parts