M6 bolt 50mm overall, 15mm threads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I printed this to use in building the Digital Sundial, http://www.thingiverse.com/thing:1068443 Customized version of…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 220
- Wydruki
- 5
- Wyświetlenia
- 786
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I printed this to use in building the Digital Sundial, http://www.thingiverse.com/thing:1068443
Customized version of http://www.thingiverse.com/thing:193647
Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647
Print Settings
Printer Brand:
Printrbot
Printer:
Printrbot Plus
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
100%
Notes:
Use a brim, the point of contact with the bed is minimal. I used 8 lines. The included nut will fit the bolt.
Instructions
Using the following options:
nut_diameter = 12
facets = 6
thickness = 2
drive_diameter = 5
nut_type = normal
head_height = 5
head_diameter = 10
nut_step_shape_degrees = 45
thread_step = 2
nut_resolution = 0.5
drive_type = phillips
resolution = 0.5
slot_depth = 2
nut_height = 6
non_thread_length = 35
wing_ratio = 1
thread_outer_diameter = 6
inner_diameter = 8
nut_thread_step = 2
texture = exclude
slot_width = 1
step_shape_degrees = 45
head_type = button
countersink = 2
type = bolt
thread_length = 15
nut_thread_outer_diameter = 9
outer_diameter = 14
non_thread_diameter = 0
Category: Parts