AVR Dragon Programmer Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the AVR Dragon programmer. I designed this case to accommodate a ZIF Adapter. The case also has a…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 380
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a case for the AVR Dragon programmer. I designed this case to accommodate a ZIF Adapter. The case also has a cutout for ISP breakout boards that make it easier to program AVRs. The breakout boards will prevent the rats-nest of wires required to use the programmer.
Update 9 April 2014 - A request was made to upload a top lid without the ribs so, here it is.
Instructions
I printed this with a 10% infill and raft support. The top lid has ribs that can be detached after the print is done and are there to ensure the printed text comes out correct.
The lid should be printed text facing up.
Category: Electronics