ID Badge Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print ID Badge Holder with lanyard attachment.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 347
- Wydruki
- 3
- Wyświetlenia
- 1890
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
An easy to print ID Badge Holder with lanyard attachment.
It was designed parametrically in Onshape. (design link) If you have a different shaped badge (or wish to make this a landscape orientation), you can use that design to accommodate your needs.
This can be printed in just about any material. I have printed it cleanly in PLA, PETG, ABS, ASA, PC+CF, and a few others. It uses ~1.5m of filament and prints in ~30m at 0.2mm layer heights, with ironing for a nice top surface. (However, it was designed for printing at 0.1mm layer height, and it is much prettier!)
Attached gCode for a Prusa Mini+, as that's what I used to design it.