1 / 6
CO2 Weather station - case for Wemos, SSD1306, Senseair S8, MH-Z19 — zdjęcie 1
1 / 6

CO2 Weather station - case for Wemos, SSD1306, Senseair S8, MH-Z19

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a housing for Wemos D1 mini, BMP280, SMT21 and Senseair S8 or MH-Z19 CO2 sensors

Ocena
4 / 5
Polubienia
40
Pobrania
196
Wydruki
1
Wyświetlenia
2198
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Share Alike

This is a housing for:

  • Wemos D1 Mini / ESP8266 ESP-12
  • 0,96" OLED Display I2C SSD1306
  • CO2: Senseair S8 as well as MH-Z19 is fitting
  • I've soldered a BMP280 and a SHT21 for temperature and humidity together
    Used DuPont cables
    Many inspiration by: https://emariete.com/en/diy-co2-monitor-wifi/
  • Printed on a Prusa Mini+
  • Prusament PLA (Opal Green, Vanilla White, Royal Blue)
  • Infill 15%
  • Printed from the surface where the display is located (top down)
  • Support needed
  • 0,15 steps

From my jobs I know how to create 3D models, but as I'm a newbie in printing, please be gentle if I made mistakes in it and give me feedback how to do it it better or optimize it - thank you!

If you need more information on the electronics, please let me know. 


 

Tagi