Remix: US Flag Refrigerator Magnet (Multicolor)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix from American Flag by PrintTo3D (7/22/11) https://www.thingiverse.com/thing:10273
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
Had a request for another refrigerator magnet, this time the U.S.flag. I took a different approach with this as I wanted the backside to look like the front side (like a real flag), so I did not create a solid separate base but, instead, all 3 files make up the base.
While this approach structurally weakens the print along the longer axis, I think it makes a better looking print.
WARNING: For those individuals whom do not have a flex-plate system installed in their printer, use caution when removing the prints utilizing the shorter edges only!! If you try to pry the print up using the longer edge, it will break!
As in most of my refrigerator magnets, I use these (from Amazon):
https://www.amazon.com/gp/product/B07CSQ28PN/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament: Most Amazon Basics PLA Red, White, and Blue (of course!!) Post-Printing =============
Use CAUTION when removing from printbed
If you need to pry the this off of your printbed, do so using the shorter edges!! If you try to remove it prying the longer edge, it will break!!
Category: Signs & Logos