Lea's Keyblade - Flame Liberator (Handle Only - WIP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
WIP - handle and chain only. Will work on blade but I'm not good at organic modelling!
- Ocena
- 0 / 5
- Polubienia
- 62
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1432
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
WIP - handle and chain only. Will work on blade but I'm not good at organic modelling! Womp
Build info is on my tumblr: https://misslaneyluck.com/post/189627003793/flame-liberator
Yes I could have done a better job on the chrome, please don't roast me
You'll have to slice the handle down for your printer, I used Meshmixer but I've improved the model and don't want to redo it right now. Main handle body was printed in 5 parts, 4 for the ring and the handle. The rings/ charm were cut in half and glued together
Print-
handle
charm
rings x3
connector x8
Painting:
Spaz Stix airbrush paint- Mirror Chrome and Candy Apple Red