1 / 1
Horizontal Filament/Spool Holder for M5 screws
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix/Remake of a low material cost horizontal filament holder.
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 335
- Wydruki
- 5
- Wyświetlenia
- 2174
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (3)Kolekcje (115)Powiązane
What you need:
- 3x M5X16 / M5X20
- 3x M5 Nuts (somewhat optional but i recommend it)
- 4x 608 bearings (if you dont have any, you can try to 3d print some. There are lots of printable bearings to try out )
- and the printed parts ofc.
The washers go between spoolholder and bearing for some added clearance. Could have been designed into the spoolholder part tbh.
If you make a rather complicated remix, it would be nice of you to upload the step file.