Raspberry Pi 4B Flirc Case Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to mount my Flirc Raspberry Pi 4B Case to the wall so i decided to create a custom mounting model for this case, could be usable on other cases but i have not tested that.
Case in question: https://flirc.tv/more/raspberry-pi-4-case
Note that in order for the bottom vents to do anything you will need to use some washers to make some screw extensions.
Screws required: 4x 8g x 25mm
Update 2021/06/23: Upon installation i noticed that where was not enough spacing for the USB 2.0 plugs and the top support was flimsy so i have made a v2 model that also includes text for the correct placement.
Update 2021/06/23: I have included optional 10mm spacer that can be used under the case for better additional airflow
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
200
Infill:
15% to 20%
Filament: eSun PLA Red
Notes:
I used normal supports not tree to allow for better adhesion, support pattern was Gyroid
V2 design overview
Category: Computer