Notepad Sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I carry a pad of paper at work, but it always gets torn and mangled in my pocket long before it is filled up. So this is an attempt to make a slim sleeve that will keep the pad from getting destroyed.
This should fit any standard 3" x 5" top coil pad of paper.
Printing:
Orient with the opening up, and the long edge along the axis the table moves, if applicable.
No supports are needed but you should turn on Experimental>Make overhangs printable in Cura. (For some reason I couldn't put a fillet in that one corner in FreeCAD.)
Print with three walls and there will be barely any infill.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: Sunlu PLA Black
Category: Office