DryBag Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DryBag sensor designed to fit inside the spool with a Thermometer / hygrometer with some re-usable silica gel beads
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Use these to help control the environment that filament spools are stored in.
This is designed to be place in the centre of the spools while they are being stored. They support sensors like these Veanic 4-pack Mini Hygrometer Thermometer Fahrenheit or Celsius Meter Digital LCD Monitor Indoor Room Round Humidity Temperature Gauge for Humidors Home Humidifiers Car Greenhouse Babyroom : Amazon.com.au: Garden and re-usable silica gel beads - Homyl Blue to Pink Dry Packs Indicating Silica Gel Desiccants, NO Cobalt Chloride - Can Rechargeable by Oven or Microwave : Amazon.com.au: Health, Household & Personal Care
This has been designed so that no support material is required.
Print 2 of the grills, they will need to be glued into the recesses in the cap and body. As shown in the photos.
All of the parts have been printed in PLA with 15% infill and no support.
When assembling the Hygrometer just needs to be pushed in and turned to the left until it stops to lock it in place. To remove the Hygrometer turn it to the right until it stops and it should lift out by using your fingernails to lift it.