Ender 3 Webcam mount extended
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I extended the mount by 50mm in both directions to get more of the build volume into the shitty FOV of my cheap…
- Ocena
- 4,5 / 5
- Polubienia
- 23
- Pobrania
- 148
- Wydruki
- 2
- Wyświetlenia
- 1450
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I extended the mount by 50mm in both directions to get more of the build volume into the shitty FOV of my cheap webcam. Also I made a bigger platform for the webcam because my old one was too small for my webcam to wrap around. You can mount (and turn) the platform by using a M5 or M6 by 10-20mm Srew and nut.
With that size its a little bit flimsy but seeing something is better than seeing almost nothing. It does its job.
I hope this helps someone! Leave a comment and post a make if you liked it!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%+
Filament: Das Filament PLA Metallic Red
Notes:
Its easy to print! Give it a try.
Category: 3D Printer Accessories