Geeetech A10/Ender 3 Cover for MeanWell LRS-350-24 power supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Geeetech A10/Ender 3 simple Cover with ventilation holes for MeanWell LRS-350-24 power supply
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 763
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I replaced the power supply that came with my Geeetech A10 by a Mean Well power supply - the same power supply type used by my Creality Ender 3 Pro.
I could use the bracket of the original power supply (all screw holes were at the same places) with the built-in power inlet and switch. The only problem was, that the original power supply was a full size version, but the Mean Well power supply is a slim version, so that a huge gap remained open which would have allowed access to the high voltage leads. So I made this cover which closes this gap and provides ventilation holes. No glue or screw neccessary - it just snaps into place.
Print Settings
Printer:
Geeetech A10
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
25%
Filament: PLA
Notes:
printing orientation: ventilation holes facing down