CH 341 Programmer Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CH 341 Programmer Enclosure - you should print the top cover with transluscent filament, because of the LEDs
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 202
- Wydruki
- 8
- Wyświetlenia
- 754
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Unfortunately the great CH 341 Programer Enclosure from alanpwood on Thingiverse did not exactly match the size of my CH341 programmer. So I decided to make my own version from scratch in Sketchup based on his design.
It has wider and stronger latches, larger cut outs for USB and the lever and it gently forces the programmer into a stable position in the enclosure.
I also made a small box for the CH 341 and its accessories, which you can find here.
Print Settings
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Resolution:
0.175
Infill:
22%
Filament: PLA
Notes:
I printed the first layer with 20mm/sec. and 65° C bed temperature.