1 / 1
insta360 one r vertical case cage
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
INSTA360 one r vertical case with gopro screw mount. Intended for mounting 360 mod on: invisible stick on helmet on…
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 152
- Wydruki
- 3
- Wyświetlenia
- 579
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (0)Kolekcje (27)Powiązane
INSTA360 one r vertical case with gopro screw mount.
Intended for mounting 360 mod on:
- invisible stick
- on helmet
- on handlebars
Vertical position sometimes is more favorable - lens is a bit higher up.
This design inspired from thingiverse 4371962.
Here are details that attended by my current design:
- bracket center is moved to align with lens center
- walls are thinner 1.5mm to be more flexible
- bottom wall is thicker to be more rigid
- button hole is now one and without a lip - it is easier to click buttons and mic is open. There is bigger bridge now - you will want to print with supports.
- screen opening is now properly cut (original design does not leave proper space for screen)
- bracket mount can be angled +/-45 degrees (original design intended 'straight only')
Printed with support (for button bridge).
Printed with PETG.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
20
Filament: generic PETG
Category: Camera