Pull Strength Test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,07 € – 0,08 € netto (bez VAT)
Dla pliku: matTEST v3_0.1mm_PLA_MK3S_4m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,07 € netto (środek widełek).
- Masa podana przez autora
- 1 g
- Czas druku podany przez autora
- 4,2 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Used for a science project to pull object to break. This was to test the strength of different filament material types.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 825
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
This is a model to test the strength of material by pulling. Attach one end to a fixed object and the other to a force sensor and pull till it breaks to get the force it breaks at.
Adjust the height to whatever you need.
Printed on Prusa Mk3S+
Layer Height: 0.2mm
Rafts: No