1 / 1
Kershaw Amplitude 2.5 Slightly Thicker Pocket Clip Spacer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacing the stock spacer with this spacer should make the pocket clip a little less tight/agressive.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I bought a Kershaw Amplitude 2.5, but I found the pocket clip a bit aggressive. I ended up replacing the stock clip spacer with this on (which is .5 mm thicker), and now things are a little better.
Printed at 100% infill, only takes about 5 minutes.
Takes 0.08 meters of filamement, cost is about 1 cent.