Hatchbox Spool Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These drawers are designed to fit the standard Hatchbox filament spools. Four drawers per spool, and clips for…
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 149
- Wydruki
- 4
- Wyświetlenia
- 533
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
These drawers are designed to fit the standard Hatchbox filament spools. Four drawers per spool, and clips for stacking the spools on top of each other. The pins should fit the four holes around the edge of the spool. No extra parts required.
I have added a thicker drawer that has 1.6mm thick walls, and 1.2mm thick base. It should work better if you need something stronger.
If you have any trouble printing the drawer pins 3mm screws will also work.
If the drawers are too tight or too loose you can stretch or compress them vertically.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
No
Resolution:
.2 or .3
Infill:
100
Filament:
hatch PLA
blue
Notes:
The walls for the Drawer are designed to be two layers thick (.8mm).
The drawer pins should be printed solid or with several perimeters to be sure they are strong enough.Category: Containers