1 / 6
Bicycle seatpost tube (32.4 mm) clamp with eyelets — zdjęcie 1
1 / 6

Bicycle seatpost tube (32.4 mm) clamp with eyelets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attaches to 32.4 mm seatpost tube to provide eyelets to mount bike rack to for horizontal stability.

Ocena
0 / 5
Polubienia
8
Pobrania
71
Wydruki
0
Wyświetlenia
607
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

If you have a bicycle that has no eyelets to mount a bike rack to, you can use this.

Note that this obviously isn't as strong as the metal equivalent, which you can buy for 10 euros. However, as this part provides horizontal support it should be fine for attaching baskets and bags to your bike rack.

Get a metal one if you have people sit on your bike rack or carry heavy loads.

Note that the sanity rails are best printed with a certain side up. The two parts will only fit in one orientation, opposite from that printed.

Crazy-glue some inner tube to each part where it is in contact with the seat tube for grip (see picture).

Additional parts required:

  • 2 x M5 bolts of 25 mm length
  • 4 x washers of corresponding size - between plastic and metal
  • 2 x M5 Nyloc nuts
  • 10 cm long strip of inner tube, about 10-12 mm wide

Tagi