1 / 2
Water Level Measuring Tool
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to find water surface distance from a user specified position.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 508
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This tool utilizes a Anndason DP5200 water level sensor attached to a long wire to determine the distance to a water surface using a multi meter. My main use case for this device was to measure the water depth in wells to determine the proper amount of pipe to install. The threading is 3/8-32 UNEF and the maximum diameter of the float sensor assembly is 1 inch.
Usage:
- Install your float sensor into the printed part.
- Connect both wires of the float sensor to two long wires that are longer than the depth to your water body.
- Connect your multi meter to the long wires and set to resistance measure function.
- Lower tool into well using wire until the multi meter detects a significant resistance change.
- Mark wire at the determined point and remove tool.
- Measure distance between float valve and the mark on the wire to get depth from water surface.