Ender 3 Z-Screw Stabilizer (Skateboard Bearing - Flush Fit)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix from https://www.thingiverse.com/thing:3080912 Just made it a bit taller so the bearing sits flush.…
- Ocena
- 4 / 5
- Polubienia
- 10
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 390
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix from https://www.thingiverse.com/thing:3080912
Just made it a bit taller so the bearing sits flush. The inner hole is also slightly larger so that the edge of the inner ring on the bearing doesn contact the plastic when spinning.
I dont use a z-motor spacer, If you do, you may need to adjust the distance between the bearing and the wall.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: HatchBox PLA Black
Notes:
Any material does the trick.
Category: 3D Printer Parts