1 / 8
Hoover Steam Vacuum Waste Basket Latches — zdjęcie 1
1 / 8

Hoover Steam Vacuum Waste Basket Latches

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement waste bucket latches for a Hoover SteamVac carpet cleaner. My model is F5914-900. OEM Part numbers should…

Ocena
5 / 5
Polubienia
2
Pobrania
56
Wydruki
2
Wyświetlenia
317
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement waste bucket latches for a Hoover SteamVac carpet cleaner. My model is F5914-900. OEM Part numbers should be: H-36151029, and H-36151019

We broke the left latch, and when I recreated it, and installed the replacement I noticed that it did not open to 90° like the other side. while the original Left and Right are identical other than mirrored, the Left side hits on a support wall within the carpet cleaner making it open only about 75% of the way. I imagine this contributes to people pulling/pushing on it to line it up with the right side. During my drawing I tried to strengthen the area that broke on our original piece as well as modified the outer part of the pin that was hitting the wall. This allows the left side to open to 90°

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Infill:

60

Filament:

Inland PLA+

Grey


Notes:

Ender 3 V2

I used Tree support and set them to print at 45° angle so the layers were offset from the usage. I used 212°c and 60°c for the bed.

Post-Printing

Added L and R for not real good reason :)

How I Designed This

Designed in Fusion 360. This is really my first design, and was used as a learning tool with a functional result.

Category: Replacement Parts

Tagi