1 / 6
Skådis - Steam Deck Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Skådis-compatible Steam Deck holder uses clips to securely hold it in place.
- Ocena
- 5 / 5
- Polubienia
- 536
- Pobrania
- 2583
- Wydruki
- 30
- Wyświetlenia
- 14 025
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 30) (Komentarze: 77)Remiksy (7)Kolekcje (738)Powiązane
Use these brackets to securely slot your Steam Deck into the Ikea Skådis pegboard system.
For a few reasons mentioned in my Secure Clip System template I opted to design this method for securely locking things (such as my precious Steam Deck) to the peg boards so that my kids or cats wouldn't carelessly knock them down.
Options:
I've included two interchangeable designs. Version A is a bit over-designed because I like truss's and version B is more restrained and flowing. You will need to also print out the 4 clips.
Print Instructions:
- Pick which design you want, A or B.
- The included files are for the left side of the deck. you will need to duplicate and then mirror the holder you want in order to get the right side version.
- There are a few overhangs that benefit from supports which i've painted into the 3mf file.
- You will need 4 clips which I print with 3-4 shells.
Installation Instructions:
