1 / 3
Minimalistic encloseure for newer Shelly line of products V1.1 — zdjęcie 1
1 / 3

Minimalistic encloseure for newer Shelly line of products V1.1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Minimalistic encloseure for newer Shelly line of products V1.1

Ocena
0 / 5
Polubienia
12
Pobrania
80
Wydruki
1
Wyświetlenia
636
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

An “as small as possible” enclosure for the Shelly line of products. All holes are 2,5 mm and are all the way through so they can be used to attach the enclosure to something as well as keeping the lid in place.

This is a slight update since V1.0 was designed uing the Shelly Dimmer 2 as a model, but I notice some (notably newer) devices are slightly thicker. So this version 1.1 should comfort house even these devices. Would you like a 2mm slimmer enclosure for the Dimmer2 or RGB you can go for the V1.0 here https://www.printables.com/model/205245

Posting the Fusion 360 file as well so you can use this and make new and better things from. Please share if you do.

Tagi