3 Wheel Carriage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I decided to go with a different design for this upgrade, you can look it up…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I decided to go with a different design for this upgrade, you can look it up here: https://www.thingiverse.com/thing:3254195
The belt tensioner should be very easy to use, with a low profile M5 screw, a couple o nylock nuts and washers, mount the tensioner on the top of the frame and use any size toothless idler.
This a Z axis carriage for 2040 V-Slot.
To use them you will need M5 low profile screws https://www.aliexpress.com/item/3d-printer-screw-low-head-cap-screw-M5x8-mm-M5-screw-carbon-steel-10pcs/32811776016.html
Update 1
-Change position for mounting holes for the left carriage and removed 1 mounting guide for motor spacer.
Update 2
-X Gantry Right v2 should be easier to precisely position, at cost of printing space (depending on you hot-end carriage design).
Update 3
-All parts added
Update 4
-Belt Tensioner added
No more updates
Please consider donating a pizza or a spool of filament.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
20%-50% HEX
Filament: Any ABS or PETG Any
Notes:
If you have some money to spare, some donations to buy filament would be greatly appreciated.
Category: 3D Printer Parts