Painter Tape Dispenser with PIP rollers aluminum extrusion mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Overview I was sick of searching for the tape when wanting to print PETG on my glass bed. It has 3 rollers that you…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
I was sick of searching for the tape when wanting to print PETG on my glass bed.
It has 3 rollers that you squeeze together to push the tape on. The rollers are Print in Place, which is why supports are needed.
Holds a standard 25mm width by 76mm inner diameter painters tape roll.
V2 UPDATE 2020-09-11
- Snug fit for mount interface with aluminum extrustion
- Longer tear arm to get a finger in between a full roll and tear arm
- slimmer mount block
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20
Filament: Any PETG or ABS Any
Notes:
Supports are required for rollers to work after printing.
Category: 3D Printer Accessories