Bruder Hydraulics Compatible with 44003
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UPDATE Nov 01, 2021 I've had issues trying to print these with PETG. I've changed the cylinder and piston to be oval…
- Ocena
- 4,75 / 5
- Polubienia
- 38
- Pobrania
- 398
- Wydruki
- 5
- Wyświetlenia
- 2301
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE Nov 01, 2021
I've had issues trying to print these with PETG. I've changed the cylinder and piston to be oval so there is less overhang in the clearance area between them
UPDATE - Feb 24, 2021
Uploaded a V2 version with more clearance between the piston and cylinder. Also adjusted the tab where the piston meets the loader so it will stay at the highest point.
Overview
The loader would not stay up any longer as it was worn out. There are a left and a right side, each side assembly is made up of 2 pieces where the piston is printed inside the cylinder. A little convincing with needle-node pliers may be required to free up the piston after the print. I've printed them with a clearance of 0.4. If you need more because the piston is stuck, send me a comment and I'll add a higher clearance file.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
20
Filament: Any PETG Any
Notes:
Use a brim and print in the orientation in the STL, with the moving stop down. The piston can be supported without laying on the inside of the cylinder in this orientation. I printed at 0.16 with 4 perimeters.
Category: Toy & Game Accessories