Cosiflor Plissee 2001-2006 Spannschuh
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spare part for a Plissee system used 2001-2006. Those parts are no longer available (at reasonable prices)…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 127
- Wydruki
- 0
- Wyświetlenia
- 851
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a spare part for a Plissee system used 2001-2006. Those parts are no longer available (at reasonable prices) so I decided to model this "Spannschuh" myself.
I used Autodesk Fusion 360 for this purpose and tried to replicate the original precise enough so it does fit it's counterpart.
My parents in law have since replaced a few of the damaged originals with my prints and so far they didn't complain.
Print Settings
Printer Brand:
Velleman
Printer:
K8400
Rafts:
Yes
Supports:
Yes
Resolution:
0.2mm
Infill:
100%
Filament: Sunlu PETG black
Notes:
Not an easy print (at least for me).
Supports are difficult to remove, mainly because the part itself is very tiny.
After experimenting with different rotations of the stl for printing I can tell that the flat print worked best for me. There apparently is no real tension on the fragile parts and thus no improvements by vertical or titlted printing.
Category: Other