E-11 Name Plate for the Stand by Props3D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a plaque to add to the stand created by Props3d. It should fit on his stand or on the modified remix that I…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 110
- Wydruki
- 3
- Wyświetlenia
- 775
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
This is a plaque to add to the stand created by Props3d. It should fit on his stand or on the modified remix that I made of this stand. You will need to print 2 of the B file for the back side of the stand. I made it this way so that you can print the plaque face up, and thus change filament for the lettering. If you are printing at .2 mm layer height, you will put the filament change at layer 21. Be sure to move your z seem to the back corner in your slicer or it will start layer 22 in the middle and cause excess extrusion on the first letter it prints after the change. You will find the stands here:
Original stand by Props3d: https://www.thingiverse.com/thing:4052768
Modified stand for the gun by MH319: https://www.thingiverse.com/thing:5384100
Category: Props