1 / 2
Swiss3Dc Starlex DHB Zero Tool Hot End for Prusa i3MK3S+ (previously Starlex 22 twist) — zdjęcie 1
1 / 2

Swiss3Dc Starlex DHB Zero Tool Hot End for Prusa i3MK3S+ (previously Starlex 22 twist)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Installing the Starlex DHB Zero Tool Hot End onto the Prusa i3MK3S+ can be done by printing the STL parts below

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
355
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This design was previously made for the Starlex 22 Twist, but is completely compatible with the New all metal hot end, zero tool, quick change over Starlex DHB heat set from Swiss3Dc.com

Nozzle to bed height is similar to your actual position, only light tuning is necessary like for any nozzle change over.

An easy replacement with 2 modified from original printed parts, and 3 new parts. In PLA, best PetG or stronger materials.

Modified Heat Sink, for a drop in replacement. Bowden tube needs to be a little longer. 2 square nuts are needed. Screw M3 length are similar.

No tool the remove fan shroud, easy full access to Heat Set.

Wire clip to hold heater and thermistor wires behind the extruder.

 

Tagi