Stubby coin screwdriver
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small coin screwdriver.
- Ocena
- 4,88 / 5
- Polubienia
- 203
- Pobrania
- 413
- Wydruki
- 25
- Wyświetlenia
- 2111
- Oceny
- 25
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
A stubby screwdriver which holds a coin. Perfect for all consumer electronics were a normal screwdriver isn't suitable.
Print both parts, laying on the flat side with snug support only on buildplate. After removing the support insert the coin and nuts and screw both halfs together.
The sub 5 meter version can be Printed with less than 5 meters of filament. (0,2mm Speed, 10%infill)
EU version
Designed for a 50 Euro cent coin. (⌀24,3x2,4mm)
Also fits a DIN 9021-8,4x24x2 washer.
AU version
Designed for an Australian 10 ¢ coin. (⌀23,6x2mm)
CA version
Designed for a Canadian 25 ¢ coin. (⌀23,9x1,6mm)
JP version
Designed for a 100 Yen coin. (⌀22,6x1,7mm)
Also fits a Swedish 2 krona coin. (⌀22,5x1,8mm, Thank you mrBira)
CZ version
Designed for a 5 Kč coin. (⌀23x1,85mm)
US version
Designed for a US 25 ¢ coin. (⌀24,3x1,8mm)
2 M3x16mm Screws and 2 M3 Nuts are required for all versions.