1 / 1
Oil Filter Wrench (15 flute, 75.1mm OD)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wrench which can be used to remove or install an engine oil filter without getting your hands dirty.
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 183
- Wydruki
- 0
- Wyświetlenia
- 1078
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (0)Kolekcje (21)Powiązane
I made this model to remove SuperTech ST3614 oil filters which have 15 flutes and a 75.1mm outer diameter. This filter is a rebranded Champ Labs PH2835.
When loosening a used filter, the oil will run down the outside of the filter, through the tool and down into your pan or bottle. This tool greatly reduces the cleanup required from oil filter changes.
A 3/8" ratchet can be installed in the printed part for more leverage.
Printable with no supports.