1 / 6
PrintrBot Simple Deluxe Y-Axis Sag Fix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is JohnSL's Y-Axis Sag Fix with the following changes: I added about 1/8" of material around all edges to make it…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is JohnSL's Y-Axis Sag Fix with the following changes:
- I added about 1/8" of material around all edges to make it stronger so that it would not break when you remove it from the built plate.
- I reduced the radius of the clearance cut for the steel rods to increase strength.
- I added some fillets for looks.
- I include Solidworks files so that you can modify it.
- Made the STL files compatible with Slic3r.
I recommend that you build it with support with the bearing channel facing downward. I used honeycomb support in Slic3r with 5mm spacing, and 5mm spacing on a 1-layer thick interface layer. The support removed very easily.
Category: 3D Printer Parts