rsilvers farm lads Form-1 Build Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I am setting up a farm with some 1+ machines that were missing build plates. Don't use ABS. Uses PLA or PETG.Make sure…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I am setting up a farm with some 1+ machines that were missing build plates.
Don't use ABS. Uses PLA or PETG.Make sure your printer doesn't print over-size as this is a close fit (about 0.2mm clearance for bolt head, and 0.25mm for Z-arm).
I used 30% infill and it was $7.23 in material at $20/KG. I used 5-outlines to help make it liquid-tight. You may want to spray clear paint on it to help seal it.
Epoxy on some 5x5x0.125 aluminum plate:
Needs a 1/4-20 nut and bolt (1.5" long) with an 11mm head diameter. Push bolt in from bottom and add some glue.
Category: 3D Printer Parts