Printed Material Torsion Test Sample
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a socket to test media for strength while using a torque-wrench. To test, print the part (with the square-side…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 366
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
This is a socket to test media for strength while using a torque-wrench.
[I just added a 21mm that works on my lug nuts. I use a low impact driver until it breaks, and then measure the removal torque]
To test, print the part (with the square-side down and no support), and record the peak torque attained before failure by using this digital torque adapter:
Use a bolt with a 3/4 inch head. If you are metric, 12mm bolts often have 19mm heads, which are 0.748 inches, so within the same tolerance range and acceptable to use.
Video here:
Report results here:
https://docs.google.com/forms/d/1kriE5LqC3GB6h65gSxKTq0k0ooMnjJq6XBKEWneHj1c
See results here:
https://docs.google.com/spreadsheets/d/1JlqLSi4sxZLdA-hHCp6Ow4isoGMNI7nlE9Nmbj1ajWk/edit?usp=sharing
Please spread this to various 3D printer forums so that we can crowd-source a comparison table of methods to achieve stronger parts.
Category: 3D Printing Tests